CPS100 Series AC and DC Power Sources

Programmable AC and DC Power Sources

The CPS100 Series programmable AC and DC output power sources are versatile sources of power for development, test and production applications requiring single phase AC or DC output. Multi-unit Parallel, Series and 3-Phase Master/Slave mode provides higher power, voltage and 3-phase application support.

This series consists of 14 models from 600VA/W to 5000VA/W per unit. All models use digital signal processing (DSP) based power conversion technology for optimal performance and efficiency. These units are excellent source for 50, 60, 400 or 360 ~ 800 Hertz for export and aerospace product testing or testing of DC powered equipment.

For questions regarding the CPS100 Series, please contact us.

Buy or Rent through PPST Solutions

OVERVIEW

OVERVIEW

The CPS100 Series programmable AC and DC output power sources are easy to use instruments which provide precisely controlled frequency and voltage conversion. On standard CPS100S models, the frequency can be adjusted from 15 to 1000 Hertz for applications such as the testing of military/avionics equipment or for the operation of 400 0r 800 Hertz electronics that are on board an aircraft or a military vessel. The adjustable frequency band in conjunction with the dual voltage ranges of 0-150 volt or 0-300 volt (or 320V below 200Hz on 2kVA to 5kVA models) as well as DC test capability provides full capabilities for testing and operating electronics deployed worldwide.

Setup and operation of the CPS100 Series is easy. The large color touch sensitive LCD display, menu soft keys and simple front panel controls allows users to vary voltage and frequency using a shuttle or by entering a value directly using the touch screen or decimal keypad (CPS120, CPS130, CPS140 & CPS150). On CPS106, CPS110 & CPS115 Models, values are entered using the touch screen pop-up keypad. The LCD displays readouts for frequency, voltage, current, peak current, crest factor, power, apparent power and power factor.

For demanding applications, the Enhanced version CPS100E Models extend output frequency to 1200Hz and add a range of special features like IEC 61000-4-11, IEC 61000-4-13, IEC 61000-4-14 and IEC 61000-4-28 power immunity testing.  Harmonics measurements and programmable output impedance are supported on enhanced models as well.

The CPS100 Series power sources are a reliable and cost effective solutions for all of your single phase AC power and DC power needs!

Download Brochure

MODELS

AVAILABLE MODELS

Standard Models
MODELPOWER (VA/W)OUPUT FORMFREQUENCY RANGE (HZ)OUTPUT VOLTAGE MAX (RMS)OUTPUT AMPS (RMS)OUTPUT VDC MAX.OUTPUT ADC MAX.INPUT POWERHEIGHTWEIGHT (KG/LBS)
CPS106S6001ØDC,15-1000150/3005.6/2.8212/4243.96/1.8990V ~ 265V2U15.9/35.0
CPS110S10001ØDC,15-1000150/3009.2/4.6212/4246.5/3.390V ~ 265V2U15.9/35.0
CPS115S15001ØDC,15-1000150/30013.8/6.9212/4249.76/4.88100V ~ 265V2U15.9/35.0
CPS120S20001ØDC,15-1000150/300 (1)16.0/8.0212/42411.3/5.65190V ~ 265V3U21.0/47.2
CPS130S30001ØDC,15-1000150/300 (1)27.6/13.8212/42419.6/9.8190V ~ 265V4U29.0/63.9
CPS140S40001ØDC,15-1000150/300 (1)32.0/16.0212/42422.6/11.3190V ~ 265V4U29.0/63.9
CPS150S50001ØDC,15-1000150/300 (1)46.0/23.0212/42432.6/16.3190V ~ 265V4U29.0/63.9
Enhanced Models
MODELPOWER (VA/W)OUPUT FORMFREQUENCY RANGE (HZ)OUTPUT VOLTAGE MAX (RMS)OUTPUT AMPS (RMS)OUTPUT VDC MAX.OUTPUT ADC MAX.INPUT POWERHEIGHTWEIGHT (KG/LBS)
CPS106E6001ØDC,15-1200150/3005.6/2.8212/4243.96/1.8990V ~ 265V2U15.9/35.0
CPS110E10001ØDC,15-1200150/3009.2/4.6212/4246.5/3.390V ~ 265V2U15.9/35.0
CPS115E15001ØDC,15-1200150/30013.8/6.9212/4249.76/4.88100V ~ 265V2U15.9/35.0
CPS120E20001ØDC,15-1200150/300 (1)16.0/8.0212/42411.3/5.65190V ~ 265V3U21.0/47.2
CPS130E30001ØDC,15-1200150/300 (1)27.6/13.8212/42419.6/9.8190V ~ 265V4U29.0/63.9
CPS140E40001ØDC,15-1200150/300 (1)32.0/16.0212/42422.6/11.3190V ~ 265V4U29.0/63.9
CPS150E50001ØDC,15-1200150/300 (1)46.0/23/0212/42432.6/16.3190V ~ 265V4U29.0/63.9

Note  (1): On 2kVA to 5kVA models, up to 320Vac RMS is available below 200Hz.

KEY FEATURES

KEY FEATURES

  • Programmable AC, DC or AC+DC
  • Dual Voltage Ranges (High/Low)
  • Constant Power Mode voltage range from 72% to F.S.
  • Programmable Frequency and start/stop phase angle
  • Programmable Current and Power Limit Protection
  • Intuitive Color Touch Screen for Front Panel Operation
  • Total of 15 Measurement functions in one screen
  • Low Voltage Distortion
  • High Crest Factor and Peak Current Capability
  • List, Pulse and Step Mode Transient capability for Line Distortion Simulation
  • Sine Wave, Fixed Harmonic content waveform library
  • Enhanced version (E) models add:
    • IEC 61000-4-11, 4-13, 4-14 and 4-28 Tests
    • Programmable L and R output impedance
    • Pass/Fail Test Mode
    • Harmonic Waveform Synthesis
    • Harmonic & THD Measurements for V and I
    • TRIAC dimmer mode
  • Master/Slave mode for Series, Parallel or 3 Phase Configurations (-AUX option)
  • USB, RS232, RS485 Remote Control Interfaces standard
  • LAN or GPIB Option Interface available on all models
  • CE Mark

APPLICATIONS

APPLICATIONS

AC and DC Test Power

The CPS100 Series Power Sources use state-of-the-art DSP technology to provide stable and accurate output, regardless of AC input line conditions. They can be programmed to supply a variety of AC, DC or a combination of AC and DC power conditions to the device under test and meter all output parameters.

Frequency/Voltage Conversion

The CPS100 Series is an excellent source of stable AC voltage over a frequency range of 15 to 1000 Hz (S version) or 15 to 1200 Hz (E version). Output voltages up to 300 or 320 Vac and 424.2 Vdc are available.

Export/Import Product Development and Test

With the ability to provide any single phase voltage and frequency combination found around the world, the CPS100 Series is a great choice for evaluating AC power input supplies for worldwide use.

DC Testing

The CPS100 Series includes a DC output mode that allows for development or testing of DC powered products up to 424.2 Vdc. Current and power limit programming is available in DC mode as well.

Avionics Power

Whenever 400Hz or 800Hz, 115Vac single phase is required to power up shipboard or airborne equipment, the CPS100 can do the job. With up to 43.5 A of current available (Model CPS150), most single phase input equipment can be powered up for repair or test purposes. For 3 phase loads, three CPS100 power sources equipped with the -AUX or -MSB option can be configured in a 3-Phase master/slave configuration.

SPECS

SPECS

Models CPS106, CPS110, CPS115, CPS120
Model CPS106 CPS110 CPS115 CPS120
INPUT SPECIFICATIONS
Input Phase 1-phase / 2-wire + Ground
Input Voltage 90~265Vac±10% 190V~265Vac±10%
OUTPUT SPECIFICATIONS – AC MODE
Power Rating 600VA 1000VA 1500VA 2000VA
Max Arms 150V Range 5.6 A 9.2 A 13.8 A 16.0 A
Max Arms 300V Range 2.8 A 4.6 A 6.9 A 8.0 A
Phase 1-phase / 2-wire + Ground
Voltage Low Range 0-150V
High Range 0-300V
(0-320V < 200Hz on 2kVA to 5kVA models)
Resolution 0.1V
Accuracy ±(0.3% setting+ 0.3% FS)
Frequency Range S: DC,15~1000Hz / E: DC,15~1200Hz
Resolution 0.1Hz ~ 1Hz
Accuracy ± 0.1% of setting ± 0.03% of setting
Harmonic Distortion ≤ 1.0% (Resistive Load)
Crest Factor ≥ 6 to 1
Load Regulation ±(1.0% + 1.0V) (Resistive Load)
OUTPUT SPECIFICATIONS – DC MODE
Power Rating 600 W 1000 W 1500 W 2000 W
Max Adc 212V Range 3.96 Adc 6.5 Adc 9.76 Adc 11.3 Adc
Max Adc 424V Range 1.89 Adc 3.3 Adc 4.88 Adc 5.65 Adc
Voltage Low Range 0-212 Vdc
High Range 0-424 Vdc
Accuracy Voltage ±(0.2% setting + 0.2% FS)
Ripple & Noise Low Range < < 700mV
High Range < 1100 mV
COMMON SPECS
Protection Over-Current, Over-Power, Short-Circuit, Over-Temperature
Operating Temperature 32°F – 104°F (0°C – 40°C), 5~85% Rel. Humidity
Altitude Below 2000 m/6550 ft
DISPLAY & CONTROLS
Color Touch LCD Display Frequency, Voltage, Current, Peak Curr. Power, VA, VAR. PF, CF
Memory (Standard) 50 Transient List Memories, 9 Steps per Memory
Calibration Front Panel Calibration
Interface Standard USB, RS485, RS232 USB, RS485, RS232
Optional LAN (Ethernet) or GPIB
REGULATORY COMPLIANCE
Approvals CE Mark
MECHANICAL SPECIFICATIONS
Dimensions (In/mm) (W x H x D) 17″ x 3.425″ x 20.5″
432 x 87 x 520 mm		 17″ x 5.24″ x 20.5″
432 x 133 x 520 mm
Weight (kg/lbs) 15.9/35 21/47.2
Models CPS130, CPS140, CPS150
Model CPS130 CPS140 CPS150
INPUT SPECIFICATIONS
Input Phase 1-phase / 2-wire + Ground
Input Voltage 190V~265Vac±10%
OUTPUT SPECIFICATIONS – AC MODE
Power Rating 3000VA 4000VA 5000VA
Max Arms 150V Range 27.6 A 32.0 A 46.0 A
Max Arms 300V Range 13.8 A 16.0 A 23.0 A
Phase 1-phase / 2-wire + Ground
Voltage Low Range 0-150V
High Range 0-300V
(0-320V < 200Hz on 2kVA to 5kVA models)
Resolution 0.1V
Accuracy ±(0.2% setting+ 0.2% FS)
Frequency Range S: DC,15~1000Hz / E: DC,15~1200Hz
Resolution 0.1Hz ~ 1Hz
Accuracy ± 0.03% of setting
Harmonic Distortion ≤ 1.0% (Resistive Load)
Crest Factor ≥ 6 to 1
Load Regulation ±(1.0% + 1.0V) (Resistive Load)
OUTPUT SPECIFICATIONS – DC MODE
Power Rating 3000 W 4000 W 5000 W
Max Adc 212V Range 19.6 Adc 22.6 Adc 32.6 Adc
Max Adc 424V Range 9.8 Adc 11.3 Adc 16.3 Adc
Voltage Low Range 0-212 Vdc
High Range 0-424 Vdc
Accuracy Voltage ±(0.2% setting + 0.2% FS)
Ripple & Noise Low Range < < 700mV
High Range < 1100 mV
COMMON SPECS
Protection Over-Current, Over-Power, Short-Circuit, Over-Temperature
Operating Temperature 32°F – 104°F (0°C – 40°C), 5~85% Rel. Humidity
Altitude Below 2000 m/6550 ft
DISPLAY & CONTROLS
Color Touch LCD Display Frequency, Voltage, Current, Peak Curr. Power, VA, VAR. PF, CF
Memory (Standard) 50 Transient List Memories, 9 Steps per Memory
Calibration Front Panel Calibration
Interface Standard USB, RS485, RS232
Optional LAN (Ethernet) or GPIB
REGULATORY COMPLIANCE
Approvals CE Mark
MECHANICAL SPECIFICATIONS
Dimensions (In/mm) (W x H x D) 17″ x 7″ x 20.5″
432 x 177 x 520 mm
Weight (kg/lbs) 29/63.9

PHOTOS

PHOTOS

Model CPS115E
Model CPS115E
Model CPS120S
Model CPS120S
Model CPS150E
Model CPS150E
Model CPS115E Rear Panel
Model CPS115E Rear Panel
Model CPS120S Rear Panel
Model CPS120S Rear Panel
Model CPS150E Rear Panel
Model CPS150E Rear Panel

MANUALS

MANUALS

Documentation, Technical and Application Assistance

Adaptive Power Systems’ seasoned sales and service team is here to help via email or a simple call.

You can also register to Access Our Online Technical Resources to download user manuals.

Adaptive Power Systems