5VPxA Series High Power DC Loads

The 5VPxA Series consists of high power load cabinet systems with input voltage ranges of 60V, 600V, 1000V or 1250V. Highest current per load unit is 1280A per load but parallel mode supports higher current requirements.

All loads share a common and intuitive user interface. The 5VPxA Series are highly efficient integrated DC load systems that operate from a single user control panel or remote control interface.

There are 39 different 5VPxA Series models ranging from 5kW to 60kW. For higher power requirements, 5VPxA models can be paralleled easily. One 5VPxA MASTER load can be paralleled with up to seven other 5VPxA DC Loads in SLAVE mode. All controls and total power and current measurement is done by the MASTER load.

For questions regarding the 5VPxA Series DC Loads, please contact us.

For more electronic DC Loads models, also refer to our 5VPxC Series DC Loads

DC Loads, Electronic Loads, Programmable Loads

OVERVIEW

The Adaptive Power 5VPxA Series loads are intended for very high power DC test and product development applications in a wide range of industries. The 5VPxA Series models support voltages to 60V, 600V, 1000V or 1250V and are well suited for testing large battery systems, high power AC/DC converters and energy storage systems found in Solar and Wind power applications. Their flexible V-I operating curves span range of voltage and current combinations at high power levels. All 5VPxA Series models have a low range mode for enhanced accuracy and resolution at lower voltage and current levels, further increasing their effectiveness.

The 5VPxA Series consists of a total of 39 different models providing a wide variation of possible voltage, current and power combinations. The DC loads can be paralleled in a MASTER/SLAVE configuration. Up to 8 loads can be paralleled this way for a maximum load rating of 480kA (8 x 5VP60-60).

The 5VPxA Series DC Load models are floor standing units.

Note: Older generation non-A version 5VP DC Loads do not support MASTER/SLAVE mode. The “A” models are backward compatible with non-A version 5VP Loads.

MODELS

5VPxA Models – 5kW – 40kW / 60V

MODEL	DESCRIPTION	MAX POWER (W)	MAX VOLTAGE (V)	MAX CURRENT (A)
5VP05-100A	High Power DC Load	5000	60	1000
5VP10-100A	High Power DC Load	10000	60	1000
5VP15-100A	High Power DC Load	15000	60	1000
5VP20-100A (1)	High Power DC Load	20000	60(1)	1000
5VP25-100A	High Power DC Load	25000	60	1000
5VP30-100A	High Power DC Load	30000	60	1000
5VP35-100A	High Power DC Load	35000	60	1000
5VP40-100A	High Power DC Load	40000	60	1000

Note 1: Also available with 120V Input range (Model 5VP20-100-01)

5VPxA Models – 5kW – 60kW /600V

MODEL	DESCRIPTION	MAX POWER (W)	MAX VOLTAGE (V)	MAX CURRENT (A)
5VP05-16A	High Voltage, High Power DC Load	5000	600	160
5VP10-32A	High Voltage, High Power DC Load	10000	600	320
5VP15-48A	High Voltage, High Power DC Load	15000	600	480
5VP20-64A	High Voltage, High Power DC Load	20000	600	640
5VP25-80A	High Voltage, High Power DC Load	25000	600	800
5VP30-96A	High Voltage, High Power DC Load	30000	600	960
5VP35-112A	High Voltage, High Power DC Load	35000	600	1120
5VP40-128A	High Voltage, High Power DC Load	40000	600	1280
5VP50-21A	High Voltage, High Power DC Load	50000	600	210
5VP60-24A	High Voltage, High Power DC Load	60000	600	240

5VPxA Models – 5kW – 60kW / 1000V

MODEL	DESCRIPTION	MAX POWER (W)	MAX VOLTAGE (V)	MAX CURRENT (A)
5VP05-05A	High Voltage, High Power DC Load	5000	1000	50
5VP10-10A	High Voltage, High Power DC Load	10000	1000	100
5VP15-15A	High Voltage, High Power DC Load	15000	1000	150
5VP20-20A	High Voltage, High Power DC Load	20000	1000	200
5VP25-25A	High Voltage, High Power DC Load	25000	1000	250
5VP30-30A	High Voltage, High Power DC Load	30000	1000	300
5VP35-35A	High Voltage, High Power DC Load	35000	1000	350
5VP40-40A	High Voltage, High Power DC Load	40000	1000	400
5VP50-50A	High Voltage, High Power DC Load	50000	1000	500
5VP60-60A	High Voltage, High Power DC Load	60000	1000	600

5VPxA Models – 5kW – 60kW / 1250V

MODEL	DESCRIPTION	MAX POWER (W)	MAX VOLTAGE (V)	MAX CURRENT (A)
5VP05-02.5A	High Voltage, High Power DC Load	5000	1250	25
5VP10-05A	High Voltage, High Power DC Load	10000	1250	50
5VP15-07.5A	High Voltage, High Power DC Load	15000	1250	75
5VP20-10A	High Voltage, High Power DC Load	20000	1250	100
5VP25-12.5A	High Voltage, High Power DC Load	25000	1250	125
5VP30-15A	High Voltage, High Power DC Load	30000	1250	150
5VP35-17.5A	High Voltage, High Power DC Load	35000	1250	175
5VP40-20A	High Voltage, High Power DC Load	40000	1250	200
5VP50-25A	High Voltage, High Power DC Load	50000	1250	250
5VP60-30A	High Voltage, High Power DC Load	60000	1250	300

Options:

Current Waveform Generator (Opt CWG): This plug in module is available for 5-Series and 5VP-Series DC Loads and provides arbitrary current waveform programming.

KEY FEATURES

Up to 60kW per Cabinet
Low Voltage Range, 0 – 6 Vdc
Voltages up to 1250Vdc
Current Ranges up to 12800 Adc
High-Speed 5 Digit Precision Metering Capability
Parallel Operation of up to Eight DC Loads for High Power Applications
Compact Design
Movable Cabinet on lockable Casters

Operating Modes: CC, CP, CR, CV, CC+CV, CP+CV
Built-in Large Battery Pack Discharge Test Modes
MPPT Mode for Solar Panel Development and Test
Built-in Short Circuit Test
Over Current Protection Test Mode
Over Power Protection Test Mode
Static and Dynamic CC Modes
Interface Options are USB, RS232, GPIB and LAN
Options: Current Waveform Generator (Opt CWG)
CE Mark

APPLICATIONS

Load Versatility

All APS 5VPxA Series Loads are equipped with a powerful micro controller and user friendly controls to provide capabilities that cover a wide range of load applications. Precision metering of Voltage, Current, Power and Resistance is standard.

Power Supply Testing

Elaborate testing of linear and switch mode AC/DC power supplies at high speeds is made possible by flexible ranging and wide V-I operating curves found in all 5VPxA Series APS loads. This supports high throughput production test and burn-in of small and large AC/DC power supplies.

Power Supply Design

With built-in features like over current protection (OPC) test and over power protection (OPP) test and dynamic constant current waveform testing, new power supply designs can be thoroughly evaluated against design specifications. An analog input mode allows arbitrary current waveforms to be applied to a unit under test as well.

Battery Charge/Discharge Testing

Time sequencing of specific discharge current levels as a function of battery voltage allows characterization and performance testing of various battery chemistries. The high current resolution and accuracy of the 5VPxA Series load supports testing of both small and large batteries. MASTER/SLAVE parallel configurations up to 480kW are available.

Solar Panel Loading

The maximum power point tracking function of the 5VPxA DC loads simulate the behavior of a solar inverter allowing solar panel testing under a variety of conditions.

SPECS

5VPxA Series Models – 60 Vdc

Model	5VP05-100A		5VP10-100A		5VP15-100A		5VP20-100A
OPERATING RANGES
Power Ranges	0-0.5 kW	0-5 kW	0-1.0 kW	0-10 kW	0-1.5 kW	0-15 kW	0-2.0 kW	0-20 kW
Current Ranges	0 – 100A	0 – 1000A	0 – 100A	0 – 1000A	0 – 100A	0 – 1000A	0 – 100A	0 – 1000A
Voltage Range	0 – 60 V
Minimum Voltage	0.1V@100A	0.7V@1000A	0.1V@100A	0.7V@1000A	0.1V@100A	0.7V@1000A	0.1V@100A	0.7V@1000A
OPERATING MODES	Constant Current (CC), Constant Resistance (CR), Constant Voltage (CV), Constant Power (CP), Constant Current + Constant Voltage (CC+CV) and Constant Power + Constant Voltage (CV)
PROTECTION	Over Power (OP), Over Current (OC), Over Voltage (OV), Over Temperature (OT)
DYNAMIC OPERATION
T high & T low	0.150-9.999 / 99.99 / 999.9 / 9999ms (20 kHz)
Slew Rate	24mA-1.5A/μs	240mA-15A/μs	24mA-1.5A/μs	240mA-15A/μs	24mA-1.5A/μs	240mA-15A/μs	24mA-1.5A/μs	240mA-15A/μs
METERING
Voltage Range	0 – 6 V	0 – 60 V	0 – 6 V	0 – 60 V	0 – 6 V	0 – 60 V	0 – 6 V	0 – 60 V
Current Range	0-100A	0-1000A	0-100A	0-1000A	0-100A	0-1000A	0-100A	0-1000A
Power Range	0-0.5kW	0-5kW	0-1.0kW	0-10kW	0- 1.5kW	0-15kW	0-2.0kW	0-20kW
SHORT CIRCUIT CURRENT	1000 A
AC INPUT & PHYSICAL SPECIFICATIONS
AC Input/Cooling	115/230 Vac ±10%, 50/60Hz / Variable Speed Fan Cooled
Dimensions (HxWxD)	577 x 647 x 766 mm 22.7″ x 25.5″ x 30.2″				736 x 647 x 766 mm 29″ x 25.5″ x 30.2″		889 x 647 x 766mm 29″ x 25.5″ x 35″
Weight (Net)	100kg / 220.5 lbs		130kg / 286.6 lbs		170kg / 374.8 lbs		220kg / 485.0 lbs

5VP Series Models – 60 Vdc (continued)

Model	5VP25-100A		5VP30-100A		5VP35-100A		5VP40-100A
OPERATING RANGES
Power Ranges	0-2.5 kW	0-25 kW	0-3.0 kW	0-30 kW	0-3.5 kW	0-35 kW	0-4.0 kW	0-40 kW
Current Ranges	0-100A	0-1000A	0-100A	0-1000A	0-100A	0-1000A	0-100A	0-1000A
Voltage Range	0 – 60 V
Minimum Voltage	0.1V@100A	0.7V@1000A	0.1V@100A	0.7V@1000A	0.1V@100A	0.7V@1000A	0.1V@100A	0.7V@1000A
OPERATING MODES	Constant Current (CC), Constant Resistance (CR), Constant Voltage (CV), Constant Power (CP), Constant Current + Constant Voltage (CC+CV) and Constant Power + Constant Voltage (CV)
PROTECTION	Over Power (OP), Over Current (OC), Over Voltage (OV), Over Temperature (OT)
DYNAMIC OPERATION
T high & T low	0.150-9.999 / 99.99 / 999.9 / 9999ms (20 kHz)
Slew Rate	24mA-1.5A/μs	240mA-15A/μs	24mA-1.5A/μs	240mA-15A/μs	24mA-1.5A/μs	240mA-15A/μs	24mA-1.5A/μs	240mA-15A/μs
METERING
Voltage Range	0 – 6 V	0 – 60 V	0 – 6 V	0 – 60 V	0 – 6 V	0 – 60 V	0 – 6 V	0 – 60 V
Current Range	0-100A	0-1000A	0-100A	0-1000A	0-100A	0-1000A	0-100A	0-1000A
Power Range	0-2.5kW	0-25kW	0-3kW	0- 30kW	0-3.5kW	0-35k W	0-4kW	0-40kW
SHORT CIRCUIT CURRENT	1000 A
AC INPUT & PHYSICAL SPECIFICATIONS
AC Input/Cooling	115/230 Vac ±10%, 50/60Hz / Variable Speed Fan Cooled
Dimensions (HxWxD)	1048 x 647 x 766 mm 22.7″ x 25.5″ x 30.2″		1201 x 647 x 766 mm 47.3″ x 25.5″ x 30.2″		1353 x 647 x 766 mm 53.3″ x 25.5″ x 30.2″		1509 x 647 x 766 mm 59.4″ x 25.5″ x 30.2″
Weight (Net)	280kg / 617.3 lbs		340kg / 749.6 lbs		390kg / 860 lbs		430kg / 948 lbs

5VPxA Series Models – 600 Vdc

Model	5VP05-16A		5VP10-32A		5VP15-48A		5VP20-64A
OPERATING RANGES
Power Ranges	0-0.5 kW	0-5 kW	0-1.0 kW	0-10 kW	0-1.5 kW	0-15 kW	0-2.0 kW	0-20 kW
Current Ranges	0 – 16 A	0 – 160 A	0 – 32 A	0 – 320 A	0 – 48 A	0 – 480 A	0 – 64 A	0 – 640 A
Voltage Range	0 – 600 V
Minimum Voltage	10V@160A		10V@320A		10V@480A		10V@640A
OPERATING MODES	Constant Current (CC), Constant Resistance (CR), Constant Voltage (CV), Constant Power (CP), Constant Current + Constant Voltage (CC+CV) and Constant Power + Constant Voltage (CV)
PROTECTION	Over Power (OP), Over Current (OC), Over Voltage (OV), Over Temperature (OT)
DYNAMIC OPERATION
T high & T low	0.050-9.999 / 99.99 / 999.9 / 9999ms (20 kHz)
Slew Rate	12.8mA-0.8A/μs	128mA-8A/μs	25.6mA-1.6A/μs	256mA-16A/μs	38.4mA-2.4A/μs	384mA-24A/μs	51.2mA-3.2A/μs	512mA-32A/μs
METERING
Voltage Range	0 – 60 V	0 – 600 V	0 – 60 V	0 – 600 V	0 – 60 V	0 – 600 V	0 – 60 V	0 – 600 V
Current Range	0 – 16 A	0 – 160 A	0 – 32 A	0 – 320 A	0 – 48 A	0 – 480 A	0 – 64 A	0 – 640 A
Power Range	0 – 0.5kW	0 – 5kW	0 – 1kW	0 – 10kW	0 – 1.5kW	0 – 15kW	0 – 2kW	0 – 20kW
SHORT CIRCUIT CURRENT	160 A		320 A		480 A		640 A
AC INPUT & PHYSICAL SPECIFICATIONS
AC Input/Cooling	115/230 Vac ±10%, 50/60Hz / Variable Speed Fan Cooled
Dimensions (HxWxD)	577 x 647 x 766mm 22.7″ x 25.5″ x 30.2″				736 x 647 x 766mm 29″ x 25.5″ x 30.2″		889 x 647 x 766mm 35″ x 25.5″ x 30.2″
Weight (Net)	100kg / 220.5 lbs		130kg / 286.6 lbs		170kg / 374.8 lbs		220kg / 485.0 lbs

5VP Series Models – 600 Vdc (continued)

Model	5VP25-80A		5VP30-96A		5VP35-112A		5VP40-128A
OPERATING RANGES
Power Ranges	0-2.5 kW	0-25 kW	0-3.0 kW	0-30 kW	0-3.5 kW	0-30 kW	0-4.0 kW	0-40 kW
Current Ranges	0 – 80 A	0 – 800 A	0 – 96 A	0 – 960 A	0 – 112 A	0 – 1120 A	0 – 128 A	0 – 1280 A
Voltage Range	0 – 600 V
Minimum Voltage	10V@800A		10V@960A		10V@1120A		10V@1280A
OPERATING MODES	Constant Current (CC), Constant Resistance (CR), Constant Voltage (CV), Constant Power (CP), Constant Current + Constant Voltage (CC+CV) and Constant Power + Constant Voltage (CV)
PROTECTION	Over Power (OP), Over Current (OC), Over Voltage (OV), Over Temperature (OT)
DYNAMIC OPERATION
T high & T low	0.050-9.999 / 99.99 / 999.9 / 9999ms (20 kHz)
Slew Rate	64mA-4A/μs	640mA-40A/μs	76.8mA-4.8A/μs	768mA-48A/μs	0.0896A-5.6A/μs	0.896A-56A/μs	0.1024A-6.4A/μs	1.024A-64A/μs
METERING
Voltage Range	0 – 60 V	0 – 600 V	0 – 60 V	0 – 600 V	0 – 60 V	0 – 600 V	0 – 60 V	0 – 600 V
Current Range	0 – 80 A	0 – 800 A	0 – 96 A	0 – 960 A	0 – 112 A	0 – 1120 A	0 – 128 A	0 – 1280 A
Power Range	0 – 2.5kW	0 – 25kW	0 – 3kW	0 – 30kW	0 – 3.5kW	0 – 35kW	0 – 4kW	0 – 40kW
SHORT CIRCUIT CURRENT	800 A		960 A		1120 A		1280 A
AC INPUT & PHYSICAL SPECIFICATIONS
AC Input/Cooling	115/230 Vac ±10%, 50/60Hz / Variable Speed Fan Cooled
Dimensions (HxWxD)	1048 x 647 x 766mm 41.3″ x 25.5″ x 30.2″		1201 x 647 x 766mm 47.3″ x 25.5″ x 30.2″		1353 x 647 x 766mm 53.3″ x 25.5″ x 30.2″		1509 x 647 x 766mm 59.6″ x 25.5″ x 30.2″
Weight (Net)	280kg / 617.3 lbs		340kg / 749.6 lbs		390kg / 859.8 lbs		430kg / 947.9 lbs

5VPxA Series Models – 600 Vdc & 1000V

Model	5VP50-21A		5VP60-24A		5VP50-50A		5VP60-60A
OPERATING RANGES
Power Ranges	0-5.0 kW	0-50 kW	0-6.0 kW	0-60 kW	0-5.0 kW	0-50 kW	0-6.0 kW	0-60 kW
Current Ranges	0-21 A	0-210 A	0-24 A	0-240 A	0-52.5 A	0-500A	0-60 A	0-600 A
Voltage Range	0- 600V \| 0 – 1000 V
Minimum Voltage	10V@210A		10V@240A		10V@500A		10V@600A
OPERATING MODES	Constant Current (CC), Constant Resistance (CR), Constant Voltage (CV), Constant Power (CP), Constant Current + Constant Voltage (CC+CV) and Constant Power + Constant Voltage (CV)
PROTECTION	Over Power (OP), Over Current (OC), Over Voltage (OV), Over Temperature (OT)
DYNAMIC OPERATION
T high & T low	0.050-9.999 / 99.99 / 999.9 / 9999ms (20 kHz)
Slew Rate	16.8mA-1.05A/us	168mA-10.5A/us	19.2mA-1.2A/us	192mA-12A/us	42mA-2.5A/us	0.42A-25A/us	48mA-3A/us	0.48A-30A/us
METERING
Voltage Range	0-60 V	0-600 V	0-60 V	0-600 V	0- 100V	0-1000 V	0-100 V	0-1000 V
Current Range	0-21 A	0-210 A	0-24 A	0-240 A	0-52.5 A	0-500 A	0-60 A	0-600 A
Power Range	0 – 5kW	0 – 50kW	0 – 6kW	0 – 60kW	0 – 5kW	0 – 50kW	0 – 6kW	0 – 60kW
SHORT CIRCUIT CURRENT	210 A		240 A		500 A		600 A
AC INPUT & PHYSICAL SPECIFICATIONS
AC Input/Cooling	115/230 Vac ±10%, 50/60Hz / Variable Speed Fan Cooled
Dimensions (HxWxD)	1360 x 853 x 766 mm 53.6″ x 33.6″ x 30.2″		1513 x 853 x 766 mm 59.6″ x 33.6″ x 30.2″		1360 x 853 x 766 mm 53.6″ x 33.6″ x 30.2″		1513 x 853 x 766 mm 59.6″ x 33.6″ x 30.2″
Weight (Net)	510kg / 1124.4 lbs		630kg / 1388.9 lbs		510kg / 1124.4 lbs		630kg / 1388.9 lbs

5VPxA SERIES MODELS – 1000 VDC

Model	5VP05-05A		5VP10-10A		5VP15-15A		5VP20-20A
OPERATING RANGES
Power Ranges	0-0.5 kW	0-5 kW	0-1.0 kW	0-10 kW	0-1.5 kW	0-15 kW	0-2.0 kW	0-20 kW
Current Ranges	0 – 5 A	0 – 50 A	0 – 10 A	0 – 100 A	0 – 15 A	0 – 150 A	0 – 20 A	0 – 200 A
Voltage Range	0 – 1000 V
Minimum Voltage	10V@50A		10V@100A		10V@150A		10V@200A
OPERATING MODES	Constant Current (CC), Constant Resistance (CR), Constant Voltage (CV), Constant Power (CP), Constant Current + Constant Voltage (CC+CV) and Constant Power + Constant Voltage (CV)
PROTECTION	Over Power (OP), Over Current (OC), Over Voltage (OV), Over Temperature (OT)
DYNAMIC OPERATION
T high & T low	0.050-9.999 / 99.99 / 999.9 / 9999ms (20 kHz)
Slew Rate	0.004A-0.25A/μs	0.04A-2.5A/μs	0.008A-0.5A/μs	0.08A-5A/μs	0.012A-0.75A/μs	0.12A-7.5A/μs	0.016A-1A/μs	0.16A-10A/μs
METERING
Voltage Range	0 – 100 V	0 – 1000 V	0 – 100 V	0 – 1000 V	0 – 100 V	0 – 1000 V	0 – 100 V	0 – 1000 V
Current Range	0 – 5 A	0 – 50 A	0 – 10 A	0 – 100 A	0 – 15 A	0 – 150 A	0 – 20 A	0 – 200 A
Power Range	0 – 0.5kW	0 – 5kW	0 – 1.0kW	0 – 10kW	0 – 1.5kW	0 – 15kW	0 – 2.0kW	0 – 20kW
SHORT CIRCUIT CURRENT	50 A		100 A		150 A		200 A
AC INPUT & PHYSICAL SPECIFICATIONS
AC Input/Cooling	115/230 Vac ±10%, 50/60Hz / Variable Speed Fan Cooled
Dimensions (HxWxD)	577 x 647 x 766 mm 29″ x 25.5″ x 30.2″		736 x 647 x 766 mm 29″ x 25.5″ x 30.2″		736 x 647 x 766 mm 29″ x 25.5″ x 30.2″		889 x 647 x 766 mm 29″ x 25.5″ x 30.2″
Weight (Net)	100kg / 220.5 lbs		130kg / 286.6 lbs		170kg / 374.8 lbs		220kg / 485.0 lbs

5VP SERIES MODELS – 1000 VDC (continued)

Model	5VP25-25A		5VP30-30A		5VP35-35A		5VP40-40A
OPERATING RANGES
Power Ranges	0-2.5 kW	0-25 kW	0-3.0 kW	0-30 kW	0-3.5 kW	0-35 kW	0-4.0 kW	0-40 kW
Current Ranges	0 – 25 A	0 – 250 A	0 – 30 A	0 – 300 A	0 – 35 A	0 – 350 A	0 – 40 A	0 – 400 A
Voltage Range	0 – 1000 V
Minimum Voltage	10V@250A		10V@300A		10V@350A		10V@400A
OPERATING MODES	Constant Current (CC), Constant Resistance (CR), Constant Voltage (CV), Constant Power (CP), Constant Current + Constant Voltage (CC+CV) and Constant Power + Constant Voltage (CV)
PROTECTION	Over Power (OP), Over Current (OC), Over Voltage (OV), Over Temperature (OT)
DYNAMIC OPERATION
T high & T low	0.050-9.999 / 99.99 / 999.9 / 9999ms (20 kHz)
Slew Rate	0.02A-1.25A/μs	0.2A-12.5A/μs	0.024A-1.5A/μs	0.24A-15A/μs	0.028A-1.75A/μs	0.28A-17.5A/μs	0.032A-2A/μs	0.32A-20A/μs
METERING
Voltage Range	0-100 V	0-1000 V	0-100 V	0-1000 V	0-100 V	0-1000 V	0-100 V	0-1000 V
Current Range	0-25 A	0-250 A	0-30 A	0-300 A	0-35 A	0-350 A	0-40 A	0-400 A
Power Range	0 – 2.5kW	0 – 25kW	0 – 3kW	0 – 30kW	0 – 3.5kW	0 – 35kW	0 – 4kW	0 – 40kW
SHORT CIRCUIT CURRENT	250 A		300 A		350 A		400 A
AC INPUT & PHYSICAL SPECIFICATIONS
AC Input/Cooling	115/230 Vac ±10%, 50/60Hz / Variable Speed Fan Cooled
Dimensions (HxWxD)	1048 x 647 x 766 mm 41.3″ x 25.5″ x 30.2″		1201 x 647 x 766 mm 47.3″ x 25.5″ x 30.2″		1360 x 647 x 766 mm 53.6″ x 25.5″ x 30.2″		1513 x 647 x 766 mm 59.6″ x 25.5″ x 30.2″
Weight (Net)	280kg / 617.3 lbs		340kg / 749.6 lbs		390kg / 859.8 lbs		430kg / 948.0 lbs

5VPxA SERIES MODELS – 1250 VDC

Model	5VP05-02.5A		5VP10-05A		5VP15-07.5A		5VP20-10A
OPERATING RANGES
Power Ranges	0-0.5 kW	0-5 kW	0-1.0 kW	0-10 kW	0-1.5 kW	0-15 kW	0-2.0 kW	0-20 kW
Current Ranges	0 – 2.5 A	0 – 25 A	0 – 5 A	0 – 50 A	0 – 7.5 A	0 – 75 A	0 – 10 A	0 – 100 A
Voltage Range	0 – 1250 V
Load ON Voltage	0 – 250V		0 – 250V		0 – 250V		0 – 250V
OPERATING MODES	Constant Current (CC), Constant Resistance (CR), Constant Voltage (CV), Constant Power (CP), Constant Current + Constant Voltage (CC+CV) and Constant Power + Constant Voltage (CV)
PROTECTION	Over Power (OP), Over Current (OC), Over Voltage (OV), Over Temperature (OT)
DYNAMIC OPERATION
T high & T low	0.050-9.999 / 99.99 / 999.9 / 9999ms (20 kHz)
Slew Rate	0.002A-0.125A/μs	0.02A-1.25A/μs	0.004-0.25A/μs	0.04A-2.5A/μs	0.006A-0.375A/μs	0.06A-3.75A/μs	0.008A-0.5A/μs	0.08A-5A/μs
METERING
Voltage Range	0 – 125 V	0 – 1250 V	0 – 125 V	0 – 1250 V	0 – 125 V	0 – 1250 V	0 – 125 V	0 – 1250 V
Current Range	0 – 2.5 A	0 – 25 A	0 – 5 A	0 – 50 A	0 – 7.5 A	0 – 75 A	0 – 10 A	0 – 100 A
Power Range	0 – 0.5kW	0 – 5kW	0 – 1.0kW	0 – 10kW	0 – 1.5kW	0 – 15kW	0 – 2.0kW	0 – 20kW
SHORT CIRCUIT CURRENT	25 A		50 A		75 A		100 A
AC INPUT & PHYSICAL SPECIFICATIONS
AC Input/Cooling	115/230 Vac ±10%, 50/60Hz / Variable Speed Fan Cooled
Dimensions (HxWxD)	577 x 647 x 766 mm 29″ x 25.5″ x 30.2″		577 x 647 x 766 mm 29″ x 25.5″ x 30.2		736 x 647 x 766 mm 29″ x 25.5″ x 30.2″		889 x 647 x 766 mm 29″ x 25.5″ x 30.2″
Weight (Net)	100kg / 220.5 lbs		130kg / 286.6 lbs		170kg / 374.8 lbs		220kg / 485.0 lbs

5VP SERIES MODELS – 1250 VDC (continued)

Model	5VP25-12.5A		5VP30-15A		5VP35-17.5A		5VP40-20A
OPERATING RANGES
Power Ranges	0-2.5 kW	0-25 kW	0-3.0 kW	0-30 kW	0-3.5 kW	0-35 kW	0-4.0 kW	0-40 kW
Current Ranges	0 – 12.5 A	0 – 125 A	0 – 15 A	0 – 150 A	0 – 17.5 A	0 – 175 A	0 – 20 A	0 – 200 A
Voltage Range	0 – 1250 V
Minimum Voltage	0 – 250V		0 – 250V		0 – 250V		0 – 250V
OPERATING MODES	Constant Current (CC), Constant Resistance (CR), Constant Voltage (CV), Constant Power (CP), Constant Current + Constant Voltage (CC+CV) and Constant Power + Constant Voltage (CV)
PROTECTION	Over Power (OP), Over Current (OC), Over Voltage (OV), Over Temperature (OT)
DYNAMIC OPERATION
T high & T low	0.050-9.999 / 99.99 / 999.9 / 9999ms (20 kHz)
Slew Rate	0.01A-0.625A/μs	0.1A-6.25A/μs	0.012A-0.75A/μs	0.12A-7.5A/μs	0.014A-0.875A/μs	0.14A-8.75A/μs	0.016A-1A/μs	0.16A-10A/μs
METERING
Voltage Range	0-125 V	0-1250 V	0-125 V	0-1250 V	0-125 V	0-1250 V	0-125 V	0-1250 V
Current Range	0-12.5 A	0-125 A	0-15 A	0-150 A	0-17.5 A	0-175 A	0-20 A	0-200 A
Power Range	0 – 2.5kW	0 – 25kW	0 – 3kW	0 – 30kW	0 – 3.5kW	0 – 35kW	0 – 4kW	0 – 40kW
SHORT CIRCUIT CURRENT	125 A		150 A		175 A		200 A
AC INPUT & PHYSICAL SPECIFICATIONS
AC Input/Cooling	115/230 Vac ±10%, 50/60Hz / Variable Speed Fan Cooled
Dimensions (HxWxD)	1048 x 647 x 766 mm 41.3″ x 25.5″ x 30.2″		1201 x 647 x 766 mm 47.3″ x 25.5″ x 30.2″		1360 x 647 x 766 mm 53.6″ x 25.5″ x 30.2″		1513 x 647 x 766 mm 59.6″ x 25.5″ x 30.2″
Weight (Net)	280kg / 617.3 lbs		340kg / 749.6 lbs		390kg / 859.8 lbs		430kg / 948.0 lbs

5VPxA SERIES MODELS – 1250 VDC

Model	5VP50-25A		5VP60-30A
OPERATING RANGES
Power Ranges	0 – 5.0 kW	0 – 50 kW	0 – 6.0 kW	0 – 60 kW
Current Ranges	0 – 25 A	0 – 250 A	0 – 30 A	0 – 300 A
Voltage Range	0 – 1250 V
Load ON Voltage	0 – 250V		0 – 250V
OPERATING MODES	Constant Current (CC), Constant Resistance (CR), Constant Voltage (CV), Constant Power (CP), Constant Current + Constant Voltage (CC+CV) and Constant Power + Constant Voltage (CV)
PROTECTION	Over Power (OP), Over Current (OC), Over Voltage (OV), Over Temperature (OT)
DYNAMIC OPERATION
T high & T low	0.050-9.999 / 99.99 / 999.9 / 9999ms (20 kHz)
Slew Rate	0.02A-1.25A/μs	0.2A-12.5A/μs	0.024A-1.5A/μs	0.24A-15A/μs
METERING
Voltage Range	0 – 125 V	0 – 1250 V	0 – 125 V	0 – 1250 V
Current Range	0 – 25 A	0 – 250 A	0 – 30 A	0 – 300 A
Power Range	0 – 5.0kW	0 – 50kW	0 – 6.0kW	0 – 60kW
SHORT CIRCUIT CURRENT	250 A		300 A
AC INPUT & PHYSICAL SPECIFICATIONS
AC Input/Cooling	115/230 Vac ±10%, 50/60Hz / Variable Speed Fan Cooled
Dimensions (HxWxD)	1360 x 853 x 766 mm 53″ x 33.6″ x 30.2″		1513 x 853 x 766 mm 59.6″ x 33.6″ x 30.2″
Weight (Net)	510kg / 1124.4lbs		630kg / 1388.9 lbs

PHOTOS

MANUALS & SOFTWARE

Documentation, Technical and Application Assistance

Adaptive Power Systems’ seasoned sales and service team is here to help via email or a simple call.

You can also register to Access Our Online Technical Resources to download user manuals.

Software

All 5VP Series loads are supported by the APS DC Load Control windows software.

Key Features:

Control all Load Settings and Functions
Retrieve, Display and Store Measurement Data
Strip Chart display of all Load Measurements
Supports all APS DC Load Models

Save Setups for Quick Recall
Create, Save, Edit and Execute Auto Test Sequences
Develop Test Sequences Off-Line for later use
Windows 7 and Windows 8.1 Compatible

Multi-threaded Data Collection to Tab Delimited Text Files
Supports USB, RS232, GPIB and LAN Interfaces
Built-in Simulation Mode
Simulation Mode Includes DC Supplies

Sample GUI Screens:

Login on site

5VPxA Series High Power DC Loads

HIGH POWER PROGRAMMABLE DC LOADS

The 5VPxA Series consists of high power load cabinet systems with input voltage ranges of 60V, 600V, 1000V or 1250V. Highest current per load unit is 1280A per load but parallel mode supports higher current requirements.

OVERVIEW

OVERVIEW

MODELS

AVAILABLE MODELS

5VPxA Models – 5kW – 40kW / 60V

5VPxA Models – 5kW – 60kW /600V

5VPxA Models – 5kW – 60kW / 1000V

5VPxA Models – 5kW – 60kW / 1250V

Options:

KEY FEATURES

KEY FEATURES

APPLICATIONS

APPLICATIONS

Load Versatility

Power Supply Testing

Power Supply Design

Battery Charge/Discharge Testing

Solar Panel Loading

SPECS

SPECS

5VPxA Series Models – 60 Vdc

5VP Series Models – 60 Vdc (continued)

5VPxA Series Models – 600 Vdc

5VP Series Models – 600 Vdc (continued)

5VPxA Series Models – 600 Vdc & 1000V

5VPxA SERIES MODELS – 1000 VDC

5VP SERIES MODELS – 1000 VDC (continued)

5VPxA SERIES MODELS – 1250 VDC

5VP SERIES MODELS – 1250 VDC (continued)

5VPxA SERIES MODELS – 1250 VDC

PHOTOS

PHOTOS

MANUALS & SOFTWARE

MANUALS & SOFTWARE

Documentation, Technical and Application Assistance

Software

ABOUT US

NEWS & EVENTS

PRESS RELEASES

SUBSCRIBE TO NEWSLETTER