New single phase output power sources cover wide range of DC and AC Load applications
Irvine, CA, June 8th, 2016 – Adaptive Power Systems Inc. (APS) is introducing three new, single phase AC or DC output power sources for AC and DC applications. These new products address a wide range of product development and test applications. Three new models cover a power range from 800VA all the way up to 4kVA. Output voltage is up to 300Vac in AC mode or up to 400Vdc in DC mode for all models.
A dual range voltage output allows support of continuous rated load currents of up to 34.8 Arms at 115 Vac on the CFS140 4kVA model. Overcurrent conditions of up to 200% of rating can be supported for short periods of time to ride through inrush current events.
All models use a common, intuitive front panel user interface that makes setting output voltage, frequency and current limit simple and convenient. A large LCD displays shows a full complement of output measurements during testing and the rotary shuttle can be used to slew voltage or frequency up or down. All CFS100 models take single phase input voltage. Output voltage is available at any desirable voltage and frequency combination up to 500 Hz and 300 Vac to power units under test. Simulated line drop-outs can be generated at specific phase angles to test for worst-case scenarios.
A special Go/No-Go test mode using user defined pass and fail limits for all output measurements is built-in so no user programming is required. A total of 50 memories with 9 limit sets each are provided for this mode of operation.
For DC testing, the CFS100 provides 200Vdc and 400Vdc voltage ranges for testing DC powered EUTs. The ability to have both AC and DC output greatly increases the flexibility and usefulness of the CFS100 series.
According to Jim Logudice, sales manager for Adaptive Power Systems, Inc.: “These new switch mode power sources offer proven reliability and cost-effective power test solutions for a wide range of single, split or three phase AC products as well as DC products. They complement our popular FC200 series of basic single phase frequency converters with more advanced fully programmable models at similar, as well as higher power levels.”
All CFS100 Series model are available from 4 weeks ARO.
For additional information, contact Adaptive Power Systems (firstname.lastname@example.org) or call toll-free +1-886-517-8400 (US) or +1 (949) 752-8400 for more information. Product information is available at www.adaptivepower.com .